3)After a measurement
Once the reading has been completed, remove the thermometer away from the
forehead/ear and observe the temperature.
After each measurement, you can enter the recall mode and query earlier temperature
readings.
Do not hold the thermometer for a long time, because it is sensitive to the ambient
temperature.
After each measurement, clean the temperature probe with a soft cloth, and put the
thermometer in a dry and well-ventilated place.
You should wait at least 10 seconds between each measurement.
It is dangerous to make a self-diagnosis or self-treatment based on the obtained
measurement results. For such purposes, please consult a doctor.
4)Read your temperature
To indicates a temperature reading in forehead or ear mode.
1. If 32°C≤T≤37.3°C(89.6°F≤T≤99.2°F), the white light will be on, with one long beep.
2. If 37.4°C≤T≤37.9°C(99.3°F≤T≤100.3°F), the orange light will be on, with 3 short beeps, and the
value in LCD flickers, which is a warning that you may have a slight fever.
3. If 38°C≤T≤42.9°C(100.4°F≤T≤109.2°F), the red light will be on, with 5 short beeps, and the
value in LCD flickers, which is a warning that you may have a high fever.
5)Switching between mute and un-mute
Use the toggle switch behind the machine to change the mute/unmute mode.
* Un-mute is only beep sound, not broadcast temperature value.
6)Checking 30 sets of memory data
When the thermometer is turned on or turmed off, by short pressing the "M" button by the
side to go to the memory mode, press "M" button again to check the 30 sets of memories
one by one. If no value, it will display "---".
*The memory data will be lost when removing the batteries.
7)ºF/ºC conversion
Open the battery cover, use the toggle switch to change the ºF/ºC.
Note: All the future temperature you are taking will be automatically
added the value you are adjusted.
8)To turn off
The unit will shut down automatically after 30 seconds of no use.
Or you can keep pressing the Measure button for 5 seconds.
unmute mode
mute mode
3
EN
Toggle switch
