Idiomas disponibles
Idiomas disponibles
OPERATION - General
The appliance is intended only for domestic use, not for professional use.
1. Handle
2. Oscillation button
3. Speed control: 0 - I - II - III
4. Rod
5. Motor housing
6. Locking screw
7. Base
OPERATION - Before first use
Remove the fan from the packaging and remove all packaging materials.
OPERATION - Assembling
1. Unscrew the 4 screws (9) from the housing.
2. Fit the rear of the fan housing (with the grip) (10) onto the motor-housing shaft, making sure that the
grip is at the top.
3. Fasten the rear fan housing by four screws (9).
4. Slide the fan blades (11) onto the shaft, making sure that the notches are aligned precisely with the
two keys on the shaft, and screw it.
5. Press the front half of the fan housing into the rear part (12) of the fan housing and tighten with the
grips (13).
2
4
3
9
5
6
14
1
9
11
10
7
8
8. Non-slip foot
9. Screws
10. Fan housing (front part)
11. Fan blades
12. Fan housing (rear part)
13. Grips
14. Power cord and plug
24
13
12
EN
