Enlaces rápidos
3700339COM
5 Drawer Dresser
Date of Purchase ___ / ___ / ___
Lot Number:
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Easy
Assembly Difficulty Meter
Follow Ameriwood Home
B343700339COM0
Tough
You
Tube
Manuales relacionados para Cosmopolitan 3700339COM
Resumen de contenidos para Cosmopolitan 3700339COM
- Página 1 3700339COM 5 Drawer Dresser B343700339COM0 Date of Purchase ___ / ___ / ___ Lot Number: Do Not Return This Product! Contact our customer service team for help first. Call: 1-800-489-3351 (toll free) Monday-Friday 9am - 5pm CST Visit: www.ameriwoodhome.com THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Página 2 Contact Us! Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit ameriwoodhome.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Página 3 Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of the part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing,...
- Página 4 Before You Start Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. ameriwoodhome.com...
- Página 5 Board Identification Not actual size Shelf Rail 33700339050 33700339030 Left Front Leg 33700339060 Left Panel Right Panel Shelf 33700339010 33700339020 33700339040 Stiffener 33700339100 Base Rail (x2) Right Front Leg Left Rear Leg Right Rear Leg 33700339110 33700339070 33700339080 33700339090 SIDE Lower Back Drawer Front (x5) Base Side Rail (x2)
- Página 6 Board Identification Not actual size BACK Drawer Bottom (x5) Drawer Back (x5) Back Panel 39991339069510D 39991167068490B K370000000 This piece is paperboard construction. It is not made from wood, but is required for the assembly of your unit. SIDE BACK SIDE ameriwoodhome.com...
- Página 7 Part List Actual Size (x16) (x16) (x12) (x20) (x12) #A22700 #A22710 #A21670 #A21970 #A22910 cam lock cam bolt wood dowel drive fastener connector bolt (x69) (x10) (x11) (x12) (x40) #A12120 #A17400 #A22760 #A22900 #A11080 7/16" pan head 3/4" bolt quickloc connector 7/16"...
- Página 8 Part List Not Actual Size left cabinet member right cabinet member (x5) left drawer member #A50385 handle right drawer member (x5) #A56770 drawer slide kit (x5) #A54900 drawer brace ameriwoodhome.com...
- Página 9 STEP 1 (x12) ameriwoodhome.com...
- Página 10 STEP 2 (x2) (x4) (x2) (x6) You will need to tap the connector (6) with a hammer to fully insert. Be sure the connector is positioned as shown before tapping into hole. Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com...
- Página 11 STEP 3 left cabinet member (x5) (x10) "L" ameriwoodhome.com...
- Página 12 STEP 4 (x2) Turn screw clockwise to lock parts in place. ameriwoodhome.com...
- Página 13 STEP 5 (x2) (x4) (x2) (x6) You will need to tap the connector (6) with a hammer to fully insert. Be sure the connector is positioned as shown before tapping into hole. Quick Assembly Proper orientation of CAM LOCK ameriwoodhome.com...
- Página 14 STEP 6 right cabinet member (x5) (x10) "R" ameriwoodhome.com...
- Página 15 STEP 7 (x2) Turn screw clockwise to lock parts in place. ameriwoodhome.com...
- Página 16 STEP 8 Quick Assembly (x4) (x2) Proper orientation of CAM LOCK ameriwoodhome.com...
- Página 17 STEP 9 Quick Assembly (x3) (x4) (x4) Proper orientation of CAM LOCK ameriwoodhome.com...
- Página 18 STEP 10 Align the holes in the Shelf Rail (E) with the quicklocs (10) and press down. Lock parts together by turning screw in quickloc clockwise. end view ameriwoodhome.com...
- Página 19 STEP 11 Quick Assembly (x2) (x4) Proper orientation of CAM LOCK ameriwoodhome.com...
- Página 20 STEP 12 ameriwoodhome.com...
- Página 21 STEP 13 ameriwoodhome.com...
- Página 22 STEP 14 (x1) (x4) Do not fully tighten screw. ameriwoodhome.com...
- Página 23 STEP 15 ameriwoodhome.com...
- Página 24 STEP 16 (x8) (x19) IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. Assure that our unit is square. Distance from corner to corner must be equal as shown. ameriwoodhome.com...
- Página 25 STEP 17 (x8) With the help of another person, flip unit on it's top. ameriwoodhome.com...
- Página 26 STEP 18 Lock parts together by turning screw in quickloc clockwise. ameriwoodhome.com...
- Página 27 STEP 19 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. (x1) IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT.
- Página 28 STEP 20 (x10) (x20) SIDE SIDE ameriwoodhome.com...
- Página 29 STEP 21 (x20) SIDE SIDE ameriwoodhome.com...
- Página 30 STEP 22 finished surface SIDE SIDE ameriwoodhome.com...
- Página 31 STEP 23 (x20) BACK SIDE SIDE ameriwoodhome.com...
- Página 32 STEP 24 left drawer member right drawer member (x5) (x10) (x20) Attach slides first and then the handle. (x5) SIDE SIDE ameriwoodhome.com...
- Página 33 STEP 25 (x10) (x5) BACK BACK SIDE ameriwoodhome.com...
- Página 34 STEP 26 Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. roller cabinet member drawer runner roller ameriwoodhome.com...
- Página 35 Maximum Loads This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 35 lbs 15.9 kg 50 lbs (per drawer) 22.7 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
- Página 36 Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit ameriwoodhome.com Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You"...
- Página 37 Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
- Página 38 Español Página 12/15 Ajuste el tornillo en sentido horario para que las partes queden fijas. Página 18 Alinee los agujeros del riel del estante (E) con los cierres rápidos (10) y presione hacia abajo. Fije las partes girando el tornillo del cierre rápido en sentido horario. Página 22 No ajuste el tornillo completamente.
- Página 39 Español OPCIÓN 1: Fijar a un montante (método aconsejado) Usando un detector de vigas, encuentre un montante en la pared. Coloque la unidad contra la pared, con el soporte de seguridad alineado en esta ubicación. Para que sea más fácil pasar el tornillo, puede perforar un agujero piloto de 1/8"...
- Página 40 Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
- Página 41 Français Page 12 / 15 Tournez la vis dans le sens des aiguilles d'une montre pour verrouiller les pièces en place. Page 18 Alignez les trous du rail de l'étagère (E) avec les verrous rapides (10) et appuyez dessus. Verrouillez les pièces ensemble en tournant la vis du verrou dans le sens des aiguilles d'une montre. Page 22 Ne serrez pas complètement la vis.
- Página 42 Français OPTION 1 : Fixation dans un montant de mur (méthode préférée) À l'aide d'un guide de montage, localisez un montant dans le mur. Placez votre unité contre le mur, avec le support de sécurité aligné à cet endroit. Pour faciliter l'insertion de la vis, vous pouvez percer un trou pilote de 3 mm de diamètre à...