Front Runner FANN002 Instrucciones De Montaje página 3

2 FIT AND SECURE
2.1
2.2
2.3
FANN002_REV_A01
Before starting the fitment you need to
remove the interior head liner.
Measuring from the front, mark the points
shown in Step 2.2.
In the ditch make marks at 300mm and
385mm for the front fixing points and at
1106mm and 1192 for the rear.
Drill 6.5mm holes on the marks you made.
Take care when drilling to ensure that you
do not damage the air bags or harness on
the underside of the roof.
6.5mm
Before securing the Nut Plates on the
inside, loosen the bracket holding the
airbag canister place. Do not completely
remove the bolts. This will give you extra
room to slide the Nut Plate in place.
13mm
3
13mm
© 2019 FRONT RUNNER VEHICLE OUTFITTERS