Idiomas disponibles
Idiomas disponibles
Installation
1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□
Shut off the water supply.
□
Insert the faucet assembly (A) through the hole
in the sink.
A
4
2
Securing the faucet assembly
□
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). Push the FastMount™ system (B)
up over the threads until it stops against the
bottom of the sink, then hand turn (clockwise)
to tighten (Fig 1).
Push
Sink
1
1
up
B
Continue to push up
and turn clockwise
to tighten
B
Push
2
B
up
3
3
Sink
B
Fig 1
Sink
