Intended Use
The digital thermometers are intended for the measurement and monitoring of human body temperature by doctor or consumers in the hospital or at home.
What is a " Normal " temperature?
Although the generally accepted " normal " temperature reading is 37.0˚C/98.6˚F, temperature readings can vary from 36.1˚C/97.0˚F to 37.2˚C/99.0˚F and still may
be considered "normal ". Variations in temperature can be attributed to activities such as exercise, smoking, eating and drinking. Your temperature is lower in
the morning than in the afternoon. Other variations may be due to the location of the temperature reading. While the oral temperature follows the guidelines
previously described, a rectal temperature is generally 0.5˚C /1.0˚F higher. Conversely, an axillary (under the arm) temperature will be 0.5˚C /1.0˚F lower.
Features of your digital thermometer
Specifications
Measurement range
Low temperature display
High temperature display
Display resolution
Accuracy
Fever beep Sound 〔＞ 37.8˚C (100.0˚F) 〕
Normal beep sound 〔 ≦37.8˚C (100.0˚F) 〕
Auto power off
Battery
Operating condition
Storage condition
Net Weight
How to take your temperature
1. Press ON/OFF button to activate. The unit will beep and display 1 second with blue backlight .
2. Then, the temperature taken last time will be displayed with blue backlight.
You will hear " please measure " after 2 seconds the device will check itself and display " Err " if any problem occurs. At the same time it will speak " Error, please
measure again! ", then red backlight display, after 60 seconds (±10seconds), it will power off automatically. Note: For no voice model it won't speak any word.
3. If self-checking result is normal LCD will display " Lo " and ˚C or ˚F will blink. Then you can start to measure, after about 8 seconds measuring is completed, ˚C or ˚F stop
blinking.
4. If you want to continue measuring, turn off the thermometer and then activate again. It will power off after no use for about 5 minutes (±60seconds). You can also press
ON/OFF key to shut off directly with a beep.
5 .On power off condition, hold pressing ON/OFF key for about 4 seconds till "ON" display, then release. Press ON/OFF key again can switch voice to ON or OFF function if
the model is with voice function.
6. On power off condition, hold pressing ON/OFF key for about 8 seconds till "---˚C " or "---˚F " display then release and press ON/OFF key again to switch to " ˚C " or " ˚F ".
After that setting is done, the device will enter measuring mode automatically.
Oral or Rectal position is recommended to take accurate temperature with this thermometer more than underarm position.
Replacing the battery
The battery in your digital thermometer needs to be replaced when
(1.5V X 3)
To replace the battery,
1. Push the battery cover to open.
2. Remove the battery.
3. Insert the new battery with the positive (+) side facing up.
4. Close the battery cover.
Cleaning your digital thermometer
This thermometer is waterproof on probe tip portion only. Before or after each using, clean the thermometer with a soft cloth and isopropyl alcohol diluted with water, or
wash with COLD soapy water. Do not sterilize by boiling method, gas or steam autoclaves.
Precautions:
1. The thermometer should only be used under the supervision of an adult. It is not a toy for children. Please keep it out of children.
2. Do not walk, run or talk during temperature taking.
3. Store the unit in the protective case when not in use.
4. Do not store the unit where it will be exposed to direct sunlight, dust or humidity. Avoid extreme temperatures.
5. Dropping or subjecting your thermometer to strong shocks should be avoided.
6. Do not attempt to disassemble the unit, except to replace the battery.
DIGITAL THERMOMETER WITH BIG LCD
USER INSTRUCTIONS
Applicable Model: BP 013
32.0˚C (89.6˚F)~ 42.9˚C (109.2˚F)
Temperature<32.0˚C (89.6˚F): display: Lo˚C (Lo˚F)
Temperature>42.9˚C (109.2˚F): display: Hi˚C (Hi˚F)
0.1
35.0˚C (95.0˚F) ~39.0˚C (102.2˚F): ±0.1˚C (0.2˚F)
Other range: ±0.2˚C (0.3˚F)
"Tin-Don" , "Tin-Don" then show your measured value ; Red backlight display on LCD
"Tin-Don", "Tin-Don" then show your measured value; Blue backlight display on LCD
5 minutes ± 60 seconds
AG13 (1.5V X 3)
Temperature: 10˚C ~50˚C (50.0˚F to 122.0˚F)
Humidity: 10%~95%RH
Temperature: -10˚C ~60˚C(-50.0˚F to 142.0˚F)
Humidity: 10%~95%RH
28g
"
Warning: Please properly place the battery away from small children and heat.
appears in the lower right corner of the display. Replace it with AG13 or LR44 battery
Date: 24-5-2017
4
