Idiomas disponibles
Idiomas disponibles
Operation and function
Electronic control
The electronic control ensures that the
temperatures set. This is achieved by
means of an advanced control of the
refrigeration system. The set temperature
will be stored in the event of power failure.
The electronic control has the
following functions:
On/off switch
Light switch
Temperature setting
Temperature indication
Alarm for too high and too low
tempera-tures
Temperature indication
The display shows the set temperature.
Temperature setting
The controller is equipped with a child lock
device. This device is activated by pushing
the "up"
simultaneously. After approx. 3 seconds
"Pof" flashes in the display.
The child lock device is cancelled by push-
ing the
and
ously. After approx. 3 seconds "Pon" flashes
in the display, and the temperature can be
set.
For the temperature setting push SET key for
more than 2 seconds.
The value of the set point will be displayed
and the "° C" or "° F" LED starts blinking;
To change the Set value push the
or
arrows within 10s.
The set temperature can be between 10
and 14° C.
To memorise the new set point value push
the SET key again or wait 10s.
14
fig. 8
and "down"
buttons simultane-
GB
buttons
