Truper Expert LAVA-2000T Instructivo página 8

Idiomas disponibles

Idiomas disponibles

• To assemble the nozzles in the metal lance, push the fast
connection ring (J).
• Set the nozzle in the metal rod.
• Pull the fast connection ring to secure the nozzle in place (K).
• To disassemble the nozzle, push the fast connection ring and
pull the nozzle to release it.
Nozzle Selection
• Depending on the job to carry out, the pressure washer carries different nozzles for different flow openings:
Nozzle
Red
Yellow
Green
White
Black
Turning On
1. Open the water faucet and keep it open all the time you are using the washer. Maximum inlet pressure: 87 PSI
2. Connect the plug into the power supply.
3. Tighten and hold the high-pressure gun trigger to release the air caught inside the washer. Release the trigger when
the water flow is constant.
4. Turn the switch into the ON position. The motor will start momentarily and then it will stop.
1
2
8
ENGLISH
Flow Abrasion
Cement, Brick, Masonry
15°
25°
40°
soap
3
Assembly
J
Exteriors, Hedges,
Patios, Terraces
Recommended Nozzle
Use with Caution
Start Up
3
4
K
Boats, RV's,
Gardening Gear
loading

Productos relacionados para Truper Expert LAVA-2000T

Este manual también es adecuado para:

18297