Idiomas disponibles
Idiomas disponibles
Place the heater on a firm level surface free from obstructions, and at least 3ft.
away from any wall and any other objects such as furniture, curtains, plants or
combustible material.
With the Power and Setting Control " B " in the " 0 " position, plug the heater
into a grounded 120V outlet.
Turn the heater "ON" by turning the Power and Setting control " B " clockwise
to your desired power setting (1, 2, 3). The Power Indicator Light "A" will illuminate.
Turn the Thermostat Control " C " to your desired setting from "
"
"(MAX).
Setting for Optimum Comfort: When the room reaches a comfortable temperature,
slowly turn the Thermostat Control "C" counter-clockwise until the heater turns off.
This is the point at which the thermostat setting equals the room temperature. At this
setting, the thermostat will automatically turn the heater on and off to maintain this
selected temperature.
This heater includes an Overheat Protection System that shuts the unit off
if it overheats due to abnormal conditions. If this occurs turn the heater "OFF", unplug it,
and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a
few minutes, plug it back in, and resume normal operation.
This heater include a safety tip over switch, which will shut the heater off in case
it is tipped over. If at any time, the heater does tip over, please put the heater back in
the upright position (wheels on bottom, controls on top). The heater will resume its
normal operation.
ADDITIONAL FEATURES
This heater has additional features:
Cord Wrap-Neatly stores power cord when the heater is not used.
Convenient Carry Handles and Heavy-Duty Caster Wheels-Allow for easy
maneuvering from room to room.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
Check for any obstruction. If you find any obstruction, turn the heater "OFF".
Unplug the heater and wait a few minutes for it to cool down. Carefully remove
the obstruction. Plug the heater in and turn it on again by referring to the
OPERATING INSTRUCTIONS.
3
"(MIN) to
