Idiomas disponibles
Idiomas disponibles
Cover Bolts
Retaining Nut
Existing Rotisserie LP
Replacement Rotisserie
Natural Gas Orifice
(identified by number)
Rotisserie Burner 1.35 mm (RED)
Gas Orifice
810-1750-S ROTISSERIE BURNER
Step 13
Step 14
Brass Orifice
Step 15
Step 16
CAUTION: Only use specified natural gas
orifice for your grill.
Note:
It is helpful to keep the screws with
the components as they are removed
for ease of reassembly.
Remove the three screws of panel from front
side of grill to gain access to the rotisserie
LP brass orifice on back side of grill. Set aside
for later use.
Using an adjustable wrench to hold the gas line
secure, use the open end wrench provided to
loosen the gas line retaining nut. With the
rotisserie gas supply line detached from the
housing, use two wrenches to remove the LP
brass orifice from the gas supply line. Replace
the LP gas brass orifice with the proper natural
gas orifice. (1.35 mm RED)
Note:
Bending the hose could damage the
supply line.
Reattach gas supply line to the rotisserie
housing by securing with the retaining nut
removed in Step 14.
Note:
Leave the back panel off until the end
of conversion and all gas leak testing
has been completed.
Re-install rotisserie cover using the bolts that
were set aside in Step 13.
12
