Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
STEP # 7
• Place sport bar on bed and align to desire position. Now you can tight all the bolts.
• Mark the two holes along mounting bracket (per side) to attach sport bar, making sure the
underside of the bed rail is free from any obstruction if possible.
• Remove sport bar and drill 3/8" holes through bed rails.
Note: This sport Bar is
compatible with our no drilling
kit (sold separately). Ask for
more information to your
authorized distributor
STEP # 8
• Install the Outer right plastic cover (T) on the tubes. Attach the cover using (3) ¼ Stainless Steel
bolt and (3) ¼ Stainless Steel lock washer. Repeat the operation with the other cover (R) on the
other side of the Sport bar.
REV.01
T
© 2016 Go Rhino Products. All rights reserved
O
N
7
