Haverland AIRPURE 19 Manual De Uso página 24

6
Colour
Blue
Purple
Deep purple
Red
Air quality indication
Air quality
Very good
Good
Fair
Bad
Note: The air quality light ring automatically goes on when the
appliance is switched on.
The appliance automatically starts operating in the AUTO mode.
To switch o the appliance, press the on/o button again and unplug
the appliance.
Note: When the humidity level in the room is very high, it is possible
that the air quality sensor has some condensation. As a result, the AIR
QUALITY light in the control panel and the air quality light ring may
indicate that the air quality is bad even though the air quality is
good, In this case, the auto mode causes the appliance to run at high
fan speed. You can solve this by cleaning the air quality sensor. If
condensatiom develops frequently during periods of high humidity,
we advise you to use one of the manual speed settings.
Fan speed lights/ lter replacement lights
The lights on the left hand side of the control panel have double
function: they either indicate the fan speed or they indicate that the
lters should be replaced or cleaned.
- When lights 1 to 2 lights up constantly, they indicate the current fan
spped.
- When light 1 ashes , you have to clean the pre lter. When lights 2
ashes, you have to replace the lter.
- When light 2 and the REPLACE FILTER light are ashing continuosly,
the lter has to be replaced, and the appliance is locked ( see chapter
" Filter replacement lock" for more information)información).