Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Anleitung_TE_CD_14_4_2B_Li_SPK8__ 07.11.12 12:46 Seite 29
6.11 LED display for clockwise/counter-
clockwise operation (Figure 6/Item 11)
The LED display for counter-clockwise/clockwise (11)
indicates the position of the changeover switch (3).
Green LED (11a) is lit: clockwise
Red LED (11b) is lit: counter-clockwise
7. Cleaning and maintenance
Always pull out the mains power plug before starting
any cleaning work.
7.1 Cleaning
Keep all safety devices, air vents and the motor
n
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
n
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
n
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts
of the equipment. Ensure that no water can seep
into the device.
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8. Disposal and recycling
The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
9. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.
GB
29
Tabla de contenido
