Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly or operation of product,
make sure all parts are present. Compare parts with
package contents list and diagram. If any part is missing or
damaged, do not attempt to assemble, install or operate
the product. Contact Customer Care for replacement parts.
• Estimated assembly time: 5 minutes.
• No tools required for assembly.
PACKAGE CONTENTS
Part
Description
Qty
A
Light set
1
Dusk to
B
1
dawn sensor
C
Transformer
1
D
Color lenses
12
OPERATION INSTRUCTIONS
If using the clear lenses, skip to step 3.
Step 1. If you would like to use a color lense,
rotate the lamp ring counterclockwise to
remove the clear lenses.
Step 2. Make sure the o-ring sits in the
groove as shown and insert the color
lense you want to use. Attach the lamp
ring by rotating clockwise, and make sure
that it is secure.
6
Visit WWW.TOTALPOND.COM for information and tips.
A
D
C
B
1
2
Step 3. Connect the sensor to the
transformer by pushing the plug into
the transformer socket and hand
tighten the nut around the plug and
socket to secure.
• If you do not want to use the
sensor, connect the lights to the
transformer in the same manner
and skip to step 6.
Step 4. Connect the lights to the
sensor by pushing the plug into the
sensor socket and hand tighten the nut
around the plug and socket to secure.
Step 5. Make sure that the transformer
and sensor are not submerged and the
sensor is facing up.
• NOTE: At night, the lights will
automatically turn on. At sunrise,
they will automatically turn off.
Step 6. Place the lights in or out of
the pond. Plug the transformer into a
properly grounded electrical outlet.
SPECIFICATIONS
Power Consumption
0.5 watts per light / 12 volts
10 ft. cord from transformer to first light
Cord Lengths
4 ft. between lights
Please call Customer Care before returning item to store: 1-888-412-6001
3
transformer
plug
from
sensor
4
sensor
plug
from
lights
5
6
GFCI
outlet
7
