Flash Sanfil Thermoflash DIGI 2 HF Manual Del Usuario página 9

Sanfil
Kit
THERMOFLASH DIGI 2 HF
Kit Thermoflash Digi 2 RF.
Wireless clock thermostat
Weekly cycle
And IP43 wall mounting receiver.
Easy to install, easy to program, the RF
Digi 2 will allow you to control your
heating system in accordance with
your way of life.
The RF Digi 2 has been designed to offer you comfort and energy savings. It will be easily
installed in your home and will control the ambient temperature according to the pro-
gram. It will control through radio waves the RF receiver which may be fitted close to the
boiler or the heating system.
The RF Digi 2 will control the ambient temperature according to 3 temperature levels.
- "comfort" temperature: this is the temperature for your hours of presence.
- "reduced" temperature : this is the temperature for your brief absences or during the
night.
- "frost protection" temperature : this is the minimum temperature for long absences. It pro-
tects your dwelling from the risk of frost.
GB
Where and how you should install
the RF Digi 2
To control accurately the ambient temperature, the
Digi 2 must be installed 1,5 m. above the floor, on an
internal wall shaded from direct sunlight and from all
thermal influences such as : television, lamps, heater,
The RF Digi 2 is delivered with a base. With this acces-
sory, you can simply put it on a furniture (table, etc...).
It is important to check that no external influence will
perturb it (heater, window...).
You can also install it on an internal wall.
Therefore, take out its wall mounting base.
Fix it to the wall.
Then replace the product on its base.
The IP43 wall mounting receiver
The IP43 wall mounting receiver can be easily installed
close to the boiler.
The RF Digi 2 will control the ambient temperature in
the dwelling and will transmit ON and OFF signals to
the receiver. The output of the receiver will then
switch ON and OFF the boiler.
Transmitter and receiver coding
!
Important : the transmitter and
receiver assembly is factory
coded and is therefore imme-
diately operational.
There is no need to recode.