Stealth Products UniLink Manual De Usuario página 8

Installation
Standard Cane Mounting
To install and adjust standard cane mounting:
A
2. Attach the lateral by using M6 x
1.0 x 12mm Button Head Screws
(D) and mounting directly to the
female side of the cane clamp.
Tighten with a 4mm Hex Wrench.
3
B
Installing the thigh guides incorrectly may cause
damage to the hardware and/or injury to the user.
1. Insert the M6 x 1.0 x
20mm Button Head
Screws (A) into the male
tube clamp (B) through
the counter-bored holes
and into the female side
of the tube clamp (C).
C
3. To adjust the lateral on the
cane, loosen the M6 x 1.0 x
20mm Button Head Screws
(A) and slide the clamp to
the desired position.
WARNING
D
EN