D90 DISINFECTION
W WASHING
PRE-WASHING
D1 CUSTOM
DISINFECTION
W1 CUSTOM
WASHING
H HANDPIECES (*)
(*) The H HANDPIECES cycle is available only with the HMD accessory;
for the activation of the H HANDPIECES cycle contact the Service Centre.
THE PRODUCT IS INTENDED EXCLUSIVELY FOR THE WASHING AND THERMAL DISINFECTION
OF REUSABLE SURGICAL INSTRUMENTS CAPABLE OF WITHSTANDING A TEMPERATURE OF AT
LEAST 80°C, WITH OR WITHOUT ULTRASONIC TREATMENT DEPENDING ON THE CYCLE.
IT IS INTENDED FOR NON-ULTRASONIC CLEANING AND DISINFECTION OF THE EXTERNAL
SURFACES OF ROTATING INSTRUMENTS ONLY WHEN USED IN COMBINATION WITH THE
APPROPRIATE ACCESSORY UNLESS SUCH INSTRUMENTS ARE EXPLICITLY DESIGNATED AS
NOT SUITABLE FOR THERMAL DISINFECTION AND CLEANING BY THE MANUFACTURER.
IT IS NOT INTENDED FOR THE CLEANING AND THERMAL DISINFECTION OF THERMOLABILE
MEDICAL DEVICES.
IT IS NOT INTENDED FOR THE CLEANING AND DISINFECTION OF INTERNAL DUCTS OF
REUSABLE SURGICAL INSTRUMENTS THAT HAVE DEEP CAVITIES WITH REDUCED LIGHT.
IT IS NOT INTENDED FOR CLEANING AND/OR DISINFECTION OF ELECTRONIC INSTRUMENTS
UNLESS EXPLICITLY INDICATED AS SUITABLE FOR THERMAL DISINFECTION AND CLEANING
BY THE MANUFACTURER.
IT IS NOT INTENDED FOR WASHING INSTRUMENTS MADE OF UNTREATED ALUMINIUM OR
WITH DECORATIVE ANODISING.
TO ACHIEVE THE BEST PERFORMANCE OF THE DEVICE, REGULAR MAINTENANCE MUST BE
CARRIED OUT ON A REGULAR BASIS.
PERIODICALLY A MESSAGE WILL BE DISPLAYED REQUESTING THAT THE SPECIFIED
MAINTENANCE CHECKS BE PERFORMED.
FOR FURTHER INFORMATION OR IN CASE OF DOUBT, CONTACT THE TECHNICAL SERVICE.
45
6'
7'
45
6'
7'
25
5'
-
45
6' ÷ 15' 7'÷16'
45
6' ÷ 15' 7'÷16'
45
6'
-
WARNING
90
3,000
4'
-
-
-
-
-
-
600÷ 1,200
10'-20'
80
(at 80°C)
(at 80°C)
600 ÷ 6,000
1'-9'
90
(at 90°C)
(at 90°C)
-
-
-
90
3.000
4'
NOTE
5
0'
36'
6' ÷ 25'
0'
20'
6' ÷ 25'
-
7'
0
6' ÷ 25'
According to
settings
0'
6' ÷ 25'
0'
34'
6' ÷ 25'
EN
2
