LG RNC5 Manual página 4

Specifications
Power Requirements
Power Consumption
Dimensions (W x H x D)
Bus Power Supply (USB)
Design and specifications are subject to change without
notice.
Caution
y Connect the power cord to wall outlet directly if
possible. Or when you use an extension cable, it is
highly recommended to use an extension cable of 110
V / 15 A or 230 V / 15 A, otherwise the unit may not
operate properly because of the lack of power supply.
y Do not overload the extension cord with excessive
electrical load.
Note
y Do not look directly at the light emitting part when the
LIGHTING is turned on.
y If the illumination brightness is glaring, switch on the
room lights or turn off the LIGHTING of the unit.
RNC5-C.DEUSLLK_SIM_ENG_MFL71994015.indd 4
Additional Information
Refer to the main label on
the unit.
Refer to the main label on
the unit.
Networked standby : 0.5 W
(If all network ports are
activated.)
Approx. 330.0 mm x
685.0 mm x 344.0 mm
5 V 0 500 mA
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for more
than 5 seconds.
Replacement of battery
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type
HIGH POWER SPEAKER SYSTEM is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is
available at the following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
For consideration of the user, this device should be installed and
operated with a minimum distance of 20 cm between the device
and the body.
Frequency range Output power (Max.)
2402 to 2480 MHz 10 dBm
2022-12-20 9:09:49