Idiomas disponibles
Idiomas disponibles
B. Relay status
Enable or disable this parameter if you want the device to
remember the connection status in the event utility power
is interrupted. Select ON to have the light turned on once
power is restored. Select OFF to have the light switched o
when the electricity comes back on. If Keep as last status is
chosen, then the switch will keep the connection status it
had before going o ine as a result of a power outage.
Select Cancel to exit menu.
9:41 AM
60 %
Settings
Click on the pencil on the upper right-hand corner of the screen to display
the Settings menu.
from this interface, you can click on the pencil icon
Device configuration:
again to change the icon, name and the location attributed to the smart
switch
will show the data related to the Wi-Fi switch.
Device information:
displays a list of automated actions
Tap-To-Run and Automation:
previously con gured for the smart switch, which do not require
con rmation once they are triggered. It also allows the management
and edition of the customized commands that have been set up through
the application.
9:41 AM
60 %
