Safety warnings for the use
of water pressurizers
Suitable uses
• The device complies with the most current safety
requirements as long as it is used for its intended purpose.
The device may only be used under permissible
performance restrictions.
• It must not be used for pumping drinking water or for
watering foodstuffs. Explosives, combustible or aggressive
materials, substances harmful to health or sewage must
not be pumped.
• The device is not suitable for commercial or industrial
use.
• Improper use or modifications to the device, the use of
components that have not been tested and approved by
the manufacturer, may result in unforeseen damage to the
device and the operator, and relieves the manufacturer of
its legal liability.
• The automatic pump control is used to command a water
pump to start and stop when any tap or valve in the
system is opened or closed. The control will maintain a
constant pressure and flow of water in the system
whenever any mains water outlet is open during pump
operation.
WARNING
The control can be used for either
potable or non-potable water. In installations where both
types of fluid are present, ensure that potable water is not
mixed with non-potable water.
Parts
Power
cord
Pump connection
cord
Working indicator
lights
Reset
pump
Water
outlet
Water
inlet
CAUTION
• Do not subject the device to rain. Do
not use the device around wet areas.
WARNING
• Do not use the device in areas where
there is danger of explosion or near combustible liquids or
gases.
WARNING
• Do not direct the water jet at the
device or other electrical components. There is a danger to
life due to electric shock.
• Ensure that the extension cord does
CAUTION
not contact the water supplying the unit.
• Do not install or turn on the unit when people or animals
are in or in contact with the water to be pumped (e.g., a
pool).
• Do not leave the unit unattended. If it is to be left for an
extended period of time, unplug it.
• Any repairs should only be made by a
Authorized Service Center. Failure to do so exposes you to
electric shock and invalidates the warranty.
• Symbols affixed to the device must not be removed or
covered. Any information on the device that is no longer
legible must be replaced immediately.
• Read and obey the operating instructions before
pumping.
Water
outlet
Control
panel
Pump connection
cable
Start pressure
adjustment screw
ENGLISH
5