Idiomas disponibles
Idiomas disponibles
EN
42 mm
figure 1
figure 4
Screw on
the rotary knurled ring (3)
Now adjust the loudspeaker to the desired position.
Hold the speaker in position and tighten the knurled ring (3) completely.
Use the self tapping screw (7) provided in order to lock parts (1) & (2) together.
Self-tapping screw
Mounting Process
Use the wall mounting part (1) to mark the fixing points
on the wall. Take into account the dimensions between
holes and the diameters marked in figure 1.
Drill wall and insert wall fixings. Screw wall mounting part to wall.
Ensure that suitable screws and wall fixings are used.
If in any doubt contact a suitably qualified expert.
Mount (3), (4) & (5) as shown in figure 2. Screw the threaded ball (4)
into the threaded insert on the rear of the loudspeaker (6) (loudspeaker
not shown below).
Tighten M10 nut (5) against the loudspeaker with a spanner.
The assembly will now be as shown in figure 3.
figure 2
Slide the hooks of the
front threaded part (2)
down in to the slots of the
wall mount part (1). (figure 4)
several turns (do not tighten completely).
Screw eyelet fixing point for safety cable
3
WARNING: The maximum loading
of this bracket (8 kg),
must never be exceeded.
No other items must be
suspended or attached to the
bracket or speaker enclosure.
User Manual/Manual de Uso
figure 3
NEO 5A BT
