Tabla de contenido
Sistemi Elettronici
di Apertura Porte e Cancelli
International registered trademark n. 804888
PLEASE NOTE! Don't stick any object to the product in its parts. Product surfaces and whatever part have to be kept free of additional
obstruction, weights, limit switches that haven't been provided in the installation.
PLEASE NOTE! If product leaves, its support structure or other parts are damaged by accidental impacts, stop the system immediately. The
product will not be used afterwards unless repaired.
Every adjustment process is being carried out during the product installation. The adjustment is on charge of the installer who has to follow the
installation brochure.
SEA product you have just bought has to be used for doors, gates, leaves and barriers automating only. SEA is not responsible for uses not
referred to or personal find-outs by installers, not authorised by SEA.
Never use the product for different aims. Whatever use different from the ones enabled is forbidden. Different uses will be considered out
of place and outside the provider limits. SEA is not responsible for eventual damages and the warranty will be called off.
Obstructions on the movement points can affect the efficiency and time length of the product.
Bear in mind that cleaning is subject to external factors such as: Weather factors, use mode, product age, corrosive agents, etc.
The evaluation and intervention on dirtiness is left to users who will increase or reduce cleaning frequency according to product state time by
time.
Cleaning has to be done when the system is stopped and the electric board is off.
Never use solvent, abrasive material or unsuitable methods contrasting the product features.
If the product gets in touch with damaging materials, keep the area clear of materials and clean the whole product
On winter time, because of low temperatures, it is better to keep the runners dry ever since ice could damage their functions
Put the differential switch of the power supply off before maintenance. In case of trouble refer to authorised technicians.
As far as the electric board is concerned refer to an authorised electric technician. The electric scheme must be never modified in all its parts.
Check the screws twice a year, since movement vibrations make them unscrew.
SEA advises not to use greases unfit for weather conditions which dry very early. We recommend the use of a flexible grease gun.
Refer to SEA for repairs.
Check the safety devices in time. Machine protections have to be sound; if they are not, they must be replaced.
Never act on parts which haven't been indicated on the brochure unless troubles or needs calling. Before acting ask for information.
PLEASE NOTE! If you are unable to a professional maintenance, if tools or specialised offices are unavailable, contact the nearest installation
service.
Check that runners and stroke are free moving.
Never adjust or maintain while the system is working. As for maintenance, make sure the product is stopped, electrical board is off and working
cycle excluded.
Don't remove the protections. If obliged, fix them back with care before usage.
Never use the product outside its operative capacity as described in the brochure (inaccuracy is cause for calling the warranty off).
Suggestions on the warning notice placed on the product must be respected for question of safety.
As for suggestions not available in the brochure, refer to normative laws in which the system works.
Use SEA original spare parts: they guarantee safety standards. (The use of non original spare parts is also cause of warranty calling off).
If the product frame is deformed (e.g. shocks) its use is not allowed. Damaged parts must be replaced (small sheet or leaves dents are not
compromising and are therefore allowed). Contact our area distributor for further information.
The installer has to provide for the necessary warning notice for eventual and/or unpredictable dangers.
Warning notice must be kept clear and visible. They must not be hidden or taken away. They must be replaced if unreadable.
The product is packed and all the components are in their own boxes.
70
67410595
®
DIFFERENT EXPLOITATION WAYS
PRODUCT CLEANING
MAIN SAFETY STANDARDS
USE ADJUSTMENTS
ENABLED USES
MAINTENANCE
WARNING NOTICE
TRANSPORT
REV 06 - 07/2010
Tabla de contenido
