Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
5. Screw leg leveler assemblies
(K) to base panel (E) until tight.
Place the cabinet upright.
6. Install the bottom shelf (G) by tipping it to
the side and inserting it into the cabinet.
With bottom shelf (G) at an angle, align
the cut-outs on the bottom shelf (G) with
the back seams caused by side panels (C
and D) and back panels (A and B).
Carefully lower the bottom shelf (G),
ensuring the front of the bottom shelf (G)
goes over the front flange of the base
panel (E).
Determine the location for the other 3
adjustable shelves (H). Hold the
adjustable shelves (H) at an angle to
make them easier to install. Repeat
above method to install. Please make
sure adjustable shelf (H) snaps into the
hooks on the unit.
Note: If the hooks are flatted during
assembly, use a slotted screwdriver (not
included) to recover them.
5
K
6
C
H
G
E
8
E
K
C
H
A
D
E
