Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Wait a moment for the glue to dry and the adapter to stick to the surface of
the dent.
6. Insert the tip of the adapter into the hole in the extractor hammer:
7. Make gentle pulsing motions that will pull out the dent (straighten the
surface):
8. When finished, treat the adhered adapter head with solvent.
•
Note: be careful in selecting the solvent so that it dissolves the adhesive but
does not damage the coatings of the surface being repaired.
9. Remove the adapter.
10. Remove the adhesive residue on the surface with a solvent.
3.3. Cleaning and maintenance
a)
After each cleaning, all the parts should be dried well before the unit is used
again.
Tabla de contenido
