Idiomas disponibles
Idiomas disponibles
Measuring
aluminum
column:
S30 Ultra-11W
is 50mm,
S30 Ultra-22W
/S30 Ultra-33W
is 40mm
the surface of the engraved object
Focusing principle:
1、The focal length of the SCULPFUN laser
module is fixed and cannot be changed .
2、The specific position of the laser focus is
50mm/40mm directly below the edge of the
aluminum alloy shell of the laser module.
3、We provide a
measuring aluminum column
help find the laser focus.
4、When the laser is focused on the surface
of the engraved object, it will exert its maximum
engraving effect.
Important Using Tips
edge of the
aluminum
alloy shell
to
X-axis controller
How to adjust the tension
of X and Y belts
1. For the X-axis, just loosen the screw,
tighten it to one side, and then fix the
screw.
2. For the Y-axis, you need to adjust the
hexagonal eccentric nut next to the bottom
roller, which can control the tightness of
the Y-axis. In addition, the tightness of the
Y-axis belt also affects the Y-axis. You can
lift the machine at an angle of 45°. If the
beam slides smoothly, it means that the Y-
axis is proper.
Pull
Eccentric nut
Adjust with
wrench
