Idiomas disponibles
Idiomas disponibles
ELECTRICAL CONNECTIONS
ACCESS TO THE AUTOMATION FUNCTIONS THROUGH THE FUNCTION DIGITAL SELECTOR:
- Press the ENTER
key for 2 seconds. The function is active when it starts to flash.
- Press key A
to scroll through the functions.
- When the desired function is visible, wait 10 seconds.
- After 10 seconds the symbol of the desired function will go from flashing to a steady light.
NIGHT function
flashing = not enabled
steady = int/ext radar control disabled - opening only with open order
MANUAL function
flashing = enabled
In order to take it back to
ALWAYS OPEN function
the door opens, the display shows the
In order to take it back to
AUTOMATIC function
the door accepts opening orders from the radars and is closed once the "automatic closure" time has passed by.
PARTIAL OPENING function
partial opening in the percentage set.
INTERNAL RADAR function
Internal radar active, external radar disabled.
ALARMS
-
alternate symbols indicate discharged battery.
-
alternate symbols indicate photocell breakdown (with photo test enabled).
-
symbol indicates a learning maneuver.
-
symbol indicates active external radar.
-
symbol indicates active external / internal radar.
PROGRAMMING THE AUTOMATIC DOOR
1 - Press and hold for 3 seconds the "B" key.
2 - Press and hold the A and ENTER
at low speed).
3 - Check the timer, in seconds, for automatic closing (by the radar).
4 - Press simultaneously the A
(automatic), press key A .
(automatic), press key A .
keys simultaneously until PR appears on the display. The door closes and after 3 seconds opens. (movement
and ENTER
keys after the desired time. The door closes completing the programming operation.
Selection key A
NOTE: If you select the MANUAL
will flash slowly instead of being a steady light.
symbol flashing and does not accept any closure order.
KEYBOARD LOCKING
- Press and hold down keys A
- The symbol on the display flashes.
- Keep them pressed until flashing stops.
KEYBOARD UNLOCKING
- Press and hold down keys A
- Release key A
and the ENTER
7
SIG
ENTER
functions or ALWAYS OPEN
the function symbols
and ENTER
at the same time.
and ENTER
at the same time.
key when the symbol on the display flashes
G
B
key
