Idiomas disponibles
Idiomas disponibles
ENG
All manuals and user guides at all-guides.com
DVR HD 750
Device switching on/off
1. To switch on the device push the Power button.
2. To switch off the device press Power button and hold it for three seconds.
Device operation mode
The device is operating in three modes: video record mode
/ photoshooting mode /
/ playback
mode
. Mode button is used to select an operation mode.
Video recording
1. When powered from the car's lighter socket, the device will switch on and start recording automatically.
In the left top corner of the screen video mode icon is displayed
, as well as recording time and
flashing icon .
2. To stop and re-start the recording manually, press Rec button.
3. During video recording press Emergency Rec button and the current file will be marked as non-removable
to prevent later overwriting. You can also immediately start file recording protected from later overwriting
by pressing Emergency Rec button before starting the recording.
Photoshooting
1. To switch to the photoshooting mode, press Mode button; in the upper left corner of the screen the
following icon will be displayed
.
2. To take a picture press Snap button, you will hear a locking sound, the picture will be stored to the
memory card. When taking a picture, try to avoid shaking the device.
Playback
1. To switch to the playback mode in the video record mode press Mode button twice. The thumbnails of
the stored files will be displayed on the screen.
2. Select the required file by pressing Left or Right buttons.
3. To switch to video playback or photo viewing after the file is selected press Ok button, to start / stop
video playback repeatedly press Ok button.
4. To return to file selection press Menu button.
5. To delete files, press Menu button during file selection, then select the action "Delet file" - to delete the
current file, or "Delete all" - to delete all files.
Built-in motion sensor
When motion detection recording is enabled, the device will start recording only when there is movement
in the Camera view. If there is constant movement, the recording is continuous; if the movement stops, the
recording will be stopped in 20 sec, after the stop of movement in the Camera view.
9
