Idiomas disponibles
Idiomas disponibles
Features
* Converter or charger
* Power cannot travel from the
output to the input through the
MPC.
Purpose
The MPC-05 (MPC) is a dual-purpose switched converter.
1. Normal converter with a 13.8 V output voltage.
2. A two-step charger with a 24-hour forced charge.
Installation
Wiring diagram
Step Action
1.
Connect the positive (+) of the load to the "Output (+)"
of the MPC.
2.
Connect the negative (-) of the load to the "Output (-)"
of the MPC.
3.
Connect the positive (+) of the power supply to the
"Input (+)" of the MPC.
4.
Connect the negative (–) of the power supply to the
"Input (-)" of the MPC.
Warnings:
The product must only be connected by skilled
fitters/mechanics who are aware of the regulations for working
with high battery voltages.
Using inferior connection material and/or wiring that is too thin may damage the product.
A short circuit between the positive and negative terminals of the battery may severely damage your system.
Always use fuses of the correct value.
Operation
Converter
In setting #1, the MPC functions as a standard converter with a 13.8 V output voltage.
Charger
In settings #2 through #7, the MPC functions as a charger. The output voltage for these settings depends on the selected
programme.
Boost
boost voltage
The
is between 14.1 V and 14.6 V and can be selected by the user by turning an internal potentiometer. A
30-minute timer will start if the voltage drops 0.8 V below the
will be reduced to the set
Float
float voltage
The
is coupled to the selected
There are two events which can cause the MPC to switch from
1. If the voltage drops below 12.8 V for 5 seconds, the
2. If the MPC has been in
MPC-05
* Very low power consumption
float voltage
.
boost voltage
float mode
for 24 hours, the
boost voltage
for one minute. After 60 minutes, the voltage
and is between 13.3 V and 13.8 V.
float
boost
to
.
boost mode
will be activated immediately.
boost mode
will be activated automatically.
0773411S-SEU
* Simple installation
EN_DE_ES_FR_NL - V23 - 211102
