Yeyian SIGURD 4000 Manual Del Usuario página 5

STAND INSTALLATION
1. Open the cardboard box, take the foam out and lay it flat on the table top.
2. Take the cable clip, adjustable stand stem and stand base out.Remove the foam
covering the bottom of the monitor. Slide the cable clip down the back of the
adjustable stand stem to attach it to the adjustable stand stem.Use the screw to
fasten the stand base to the adjustable stand stem.
Cable Clip
Screw
Adjustable Stand Stem
Stand Base
3. Press the button to remove the stand cover, and use two screws to install the
adjustable stand stem.
Stand Plate
Button
Screws