REEL MOWER OPERATOR'S MANUAL
Assembly & Set-up (continued)
4. Mount the throttle lever to the backside of upper
handle as shown: NOTE: Place the nuts on the
backside.
5. Secure the throttle wire using the holder clips on the
handle. Note: Use 1 or 2 clips depending on the
routing.
IMPORTANT: Check the movement of the throttle
on the engine verifying that it travels freely and
completely to the slow and fast positions when
moving the lever.
Evergreen Turf Equipment, LLC • 1028 4
6. Mount the grass catcher bail to the grass catcher.
Attach the bail ends to the grass catcher using the flat
washers and clevis pins provided
Note: The bail has slightly different lengths on
each side, so align with the engine hook to
determine the proper position. The grass catcher
bin has three sets of mounting holes for the bail
so an adjustment can be made according to the
expected load, weight and ground clearance.
The bottom of the grass catcher has 2 brackets
designed to rest on the caster bracket.
The image below identifies key components of the
California Trimmer Mower so take the time to familiarize
yourself with them and their function.
St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.com
th
(RL205HC & RL207H/HC)
Key Components
EN
Page 3