Idiomas disponibles
Idiomas disponibles
INSERT SIM CARD
Your TECNO smartphone has 2 SIM card slots.
First switch off your TECNO smartphone
completely, as you should not remove the battery
during operation.
Open the cover on the back of the phone and
remove the battery .
SIM tray 1: You need a nano SIM card, which you
insert according to the diagram.
SIM tray 2: You need a nano or SD micro card,
which you insert according to the diagram.
Insert the battery and close the cover.
YOUR DEVICE IS NOW READY
FOR LAUNCH
To switch on your device, press and hold the POWER
button and wait until the screen turns on.
To switch off your unit, press and hold the POWER
button, then touch the menu item "Switch off".
To restart your unit, press and hold the POWER
button until the unit vibrates.
CHARGING THE BATTERY
Your TECNO mobile phone is powered by a
rechargeable battery.
A red flashing light indicates when the battery
charge level is too low. Therefore, charge the
battery, because a low charge level can shorten
the life of your battery.
Connect the charger to a wall socket and the USB
cable to the USB port of your mobile phone.
During the charging process, the status indicator of
the unit lights up red continuously. When fully
charged, the status indicator switches to green and
the charger can now be disconnected.
For further information, please refer to the chapter
"SAFETY INSTRUCTIONS":
SAFETY INSTRUCTIONS
Please read the complete safety instructions before
using your appliance to ensure safe and correct
operation and to use the appliance properly.
1. Disposal of electrical and electronic equipment
disposed of with other household waste.
It is the user's responsibility to dispose of the
The crossed-out wheeled bin symbol
symbol on your product,battery or
packaging, is intended to remind you
that all electronic products and
batteries must be disposed of separately
at the end of their life and should not be
06
