Idiomas disponibles
Idiomas disponibles
7. Cleaning and Maintenance
» If necessary wipe the outside and inside of the product with a slightly damp cloth.
» Avoid contact with corrosive substances like acids, alkaline or similar substances.
8. Troubleshooting
Problem
The safe won't open
when entering the
passcode.
The door won't shut.
The icon turns on.
The
icon is flashing.
9. Environmental Protection
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
Used batteries must not be disposed of through household garbage, since
they might contain toxic elements and heavy metals that can be harmful
to the environment and human health.
Consumers are therefore obligated to return batteries to retail or local
collection facilities free of charge. Used batteries will be recycled.
They contain important raw materials such as iron, zinc, manganese or nickel.
The crossed-out wheelie bin symbol indicates: Batteries and rechargeable
batteries must not be disposed of through household garbage.
The symbols below the wheelie bin indicate:
Pb: Battery contains lead
Cd: Battery contains cadmium
Hg: Battery contains mercury
The packaging consists of cardboard and correspondingly marked plastics
that can be recycled. Make these materials available for recycling.
Solution
» Make sure you entered the correct passcode.
» Press the # key after entering the passcode.
» The safe might be in lockout. Wait 5 minutes and try again.
» Replace the batteries.
» Make sure there are no obstructions.
» If the door bolts (C) are extended, re-enter the passcode
and turn the knob (F) clockwise to retract them.
Replace the batteries.
» Make sure you entered the correct passcode.
» Press the # key after entering the passcode.
EN
11
