Steinberg Systems SBS-ET-1000 Manual De Instrucciones página 26

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 100
ee) When using the machine, it is forbidden to pull the chain/rope/belt in a
direction other than along the track. Pulling sideways may cause damage to
the unit
ff)
Do not use excessive force and jerk the chain/rope/belt in case of resistance.
gg) The equipment should not be used in corrosive environments, at low ambient
temperatures or to transport hot, liquid masses.
hh) Avoid switching on/off sequences at very short intervals.
ii)
Make sure that the equipment moves in the direction specified by the controls.
jj)
Disconnect the unit from the power supply when not in use.
kk) Do not move loads that are pinned to the ground or blocked by other objects.
ll)
Loads must be lifted off the ground at the slowest possible speed.
mm) The rope/chain/belt attached to the machine must be held taut when lifting
the load.
nn) The I-beam on which the device will move must be in good technical condition
and must not have any cracks or deformations.
oo) The permissible load is constant and does not depend on the position in which
the load is placed.
pp) The device is not designed for continuous operation. Observe the operating
cycle of the device.
qq) If the equipment is used in noisy environments, the operator should wear
hearing protection.
rr)
The A-weighted sound pressure level at the operator's station is less than 70
dB.
ss) The ambient temperature in the operating area should be between 0-40°C.
CAUTION! Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features provided
to the user, there is still a slight risk of accident or injury when handling
the product. Caution and common sense are advised when using the
product.
3. Rules of use
The device is designed for transport on a monorail track. It can be used as
an anchor point for winches.
The user is responsible for any damage resulting from misuse.
loading