Idiomas disponibles
Idiomas disponibles
security
Made in Italy
BT2014/35/UE
EMC2014/30/UE
Input NC for connection magnetic contacts or "switch" contacts for blinds.
Signal discharged battery through LED and radio transmission.
Tamper anti-tampering.
Container ABS.
Magnetic contact included.
Transmission frequency: 433,92 MHz
Power supply: battery 9V (supplied)
Max absorption in st/by: 9 µA
threshold level for discharghed battery: 7,4 Volt
Dimensions: 116x30x25 mm
INSTALLATION
The installation is effectuated fixing XR200M near the door and the window to protect.
CONNECTION CONTACTS SWITCH
In option to magnetic contacts it's possible,eventually,to connect to input NC of transmitter XR200M the contacts for blinds
type switch.
WARNING : For the connection of switch contacts, to follow the following:
Hold down left button for about 5 seconds until turns on the green LED.
To his release, the green LED turns off, and the reading of switch contacts is activated.
To disactive this function, press the right button for about 5 seconds,untile turns on the red LED.
The configuration will be maintained even in case of replacement battery.
C58M
Magnetic contact
brown colour
INSTALLATION
Lead free
Lead free
Lead free
Lead free
Pb
Pb
Pb
Pb
RoHS
RoHS
RoHS
RoHS
compliant
compliant
compliant
compliant
CHARACTERISTICS
Colour
Installation
Output terminals
Voltage max.
Max current.
Cable length
Max operating distance
On wood or plastic
Alarm output
Container
Operating temperature
Dimensions (LxAxP)
DOOR FRAME
18mm max.
VIA RADIO MAGNETIC CONTACT, BROWN COLOUR
+5°C - 40°C
Circuit NC of protection 24h (Short wires)
Magnetic contact NC (Long wires)
WINDOW
To mount only on the wood, aluminium
or non/ferrous materials.
XR200M
marrone
su porte e finestre
2 fili
30V
500mA
± 10mm 25cm
18mm
NC
Nylon
16x9x40mm
3
