Clean The Mopping Module - Dream Bot D9 Max Manual De Usuario

EN
Routine Maintenance

Clean the Mopping Module

1. Press the two release clips on the side of water tank, remove the
mopping module and pull the mop pad off the mopping module.
2. Pour out the water in the tank. Clean with water only and leave
to air dry before re-installing.
Note: Do not expose the tank to the sun directly.
14
3. Clean the mop pad with water only and leave to air dry before
re-installing.
Note:
• Remove the pad from the mopping module before cleaning it, and make
sure dirty water does not flow back into the water outlet to avoid clogging.
• For optimal performance, it is recommended to replace the mop pad every
3 to 6 months.
4. If slow water flow occurs, or the volume is not well-distributed,
please clean the air hole in the cover of the water tank.