Idiomas disponibles
Idiomas disponibles
•
Before waxing, clear and dry the surface being
polished.
•
Do not apply too much wax to the bonnet at one time. If
the foam pad gets saturated, the endurance of the pad
may be reduced.
•
Always start and stop the machine on or against the
surface being polished.
4.2
STOP THE MACHINE
Figure 4.
1. Set the on/off button to off position.
5
MAINTENANCE
WARNING
Remove the battery pack from the machine before
maintenance.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
6
CLEAN AND MAINTENANCE
•
The bonnets are reusable and can be machined in cold
water using a mild detergent.
•
Use a moist cloth with a mild detergent to clean the
machine and bonnets.
•
Clean all moisture with a soft dry cloth.
•
Use a small brush to clean the air vents.
7
TECHNICAL DATA
Voltage
Maximum Speed
Diameter
Weight (without battery
pack)
Measured sound pressure
level
Measured sound power level L
Vibration
Battery model
Charger model
The recommended ambient temperature range:
NOTE
24 V
-1
2800 (±10%) min
25.4 cm
1.9 kg
L
= 83 dB(A), K
= 3
PA
PA
dB(A)
= 94 dB(A), K
= 3
WA
WA
dB(A)
2
2
6.13 m/s
, K = 1.5 m/s
G24B2, G24B4 and other
BAG series
2913907 and other CAG ser-
ies
English
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
8
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
GLOBGRO AB
Globe Group Europe
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name:
Micael Johansson
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
•
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
•
2011/65/EU & (EU)2015/863
•
2014/30/EU
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
•
EN 62841-1;EN 62841-2-4; EN 55014-1; EN 55014-2;
IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC
62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8
Place, date: Malmö, 07.07.2021
5
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Buffer
BUM301
See product rating label
See product rating label
Signature: Ted Qu,
Quality Director
EN
