Idiomas disponibles
Idiomas disponibles
Before installing this accessory, please first set up the Google
Nest Cam (battery) using the in-box cable provided with the
camera. This will ensure that you have the latest firmware.
In the Box
1 x PoE adapter
1 x user manual
Installation
1. Connect the PoE Adapter to the PoE Switch via a RJ45 cable (not included).
RJ45
PoE Device
PoE Adapter
2. Connect the pogo cable to the camera for charging it. The LED indicators
around the PoE Adapter turns green while charging your Nest Cam.
To install the POE adapter through a wall, drill a 1/2 in (13mm) hole for the
magnetic connector to fit.
PoE Adapter
Note:
Make sure that the connector is connected in the right direction as shown in
the picture.
Page 1
Nest Cam
Weatherproof
Magnetic Connector
Back
Front
Page 2
