Lippert Components 12588 Serie Instalación página 6

Idiomas disponibles
  • ES

Idiomas disponibles

Technical Data
Product
Weight
Snapdragon
2.1 kg (4.6 lbs)
Assembling the Product
The product was assembled at the Manufacturer's premises.
Installing the Product
• Before installing the product, check there is sufficient distance between the television and adjacent
surfaces or other adjacent objects.
• Use all the holes on the mounting plates to fix the product to the surface.
• The anchors (material, diameter and length) shall be chosen considering the constructions material,
the maintenance condition and the thickness of the surface.
• The product shall be installed on surfaces in good condition and being sufficiently thick to support
the weight of the product and the television.
• Follow the instructions given on the anchor packaging.
NOTE: The product shall be installed on vertical surfaces
1.
Place the mounting plate at the point where you want to install the product.
2.
By means of a spirit level, check the mounting plate is in a horizontal position.
3.
Use a pencil to mark the holes on the surface.
4.
Remove the mounting plate.
5.
Drill the surface.
6.
Insert the anchors.
7.
Place the mounting plate in line with the holes.
8.
Screw in the screws to the anchor to fasten the mounting plate.
Installing the Television
NOTE: The screws fixing the television to the support bracket are not provided.
NOTE: Two people are required to install the television on the support bracket: one person shall hold the
television and the other shall tighten the fixing screws.
• The length of the screws or the combination of screws/spacers shall be such that they sufficiently
engage the thread of the hole on the television.
• Tighten the screw for at least 5 turns into the hole on the television. If the screw is too short it will not
bear the television. If the screw is too long it will damage the television.
• Screw in the screws only enough to securely fasten the support bracket to the television. DO NOT
over-tighten the screws.
1.
Lift the television up to the height of the support bracket.
2.
Screw in the screws. Use all 4 holes on the television.
If the installation fails, contact customer service.
Rev: 11.22.22
Maximum Load
10 kg (22 lbs)
Page 6
EN
CCD-0005297
loading

Productos relacionados para Lippert Components 12588 Serie