FRIONOR PI603 Manual De Instalacion Y Uso página 17

expiration and the relative cooking zone will
automatically switch off. Press any of the
keys to stop the acoustic signal.
In order to disable the timer on a cooking
zone, select it, press the Timer key to enter
the timer function then press the [-] key until
reaching position «00». Press the Timer key
to confirm.
• AUTOMATIC SWITCHING OFF
The appliance is equipped with a safety
system that automatically switches off the
cooking zones after the switch-on limit time
at a given power, has elapsed.
POWER MANAGAMENT SETTING
The hob is equipped with a power manage-
ment function to limit the total maximum
power.
There are 5 power supply levels: 2.8 kW, 3.5
kW, 4.5 kW, 5.5 kW, 6.4 kW.
• INPUT SETTING PROCEDURE:
It is not necessary to place any cookware on
the heating zones.
It is recommended to start the setting
procedure within 5 seconds after connecting
the hob to power supply. The input setting
process mode is activated by holding down
the timer control and pressing the Lock
control three times.
The flashing Po symbol will appear above
the timer and the power numbers will be
displayed in the two zones.
Power settings can be adjusted using the
+ or – controls, as follows : 2.8 kW or 3.5
kW or 4.5 kW or 5.5 kW or 6.4 kW. Over the
power limitation, it will be beep 3 times
for reminding and stop to add the working
levels.
• SWITCHING A COOKING ZONE OFF
To switch a cooking zone off, select it then
press simultaneously the [+] and [-] key or
press the [-] key until reaching position «0».
• SWITCHING THE APPLIANCE OFF
To turn off the cooking top entirely hold
down the On-Off key.
• SAFETY SWITCH
The appliance has a safety switch that
automatically switches off the cooking zones
when they have been operating for a certain
amount of time at a given power level.
Level
6 - b
5
3 - 4
1 - 2
ERROR DISPLAY
ERROR MEANING
The voltage is
E1
lower than 85 V.
The voltage is
E2
higher than 285 V.
The hob tempera-
E3
ture sensor does
not work.
IGBT (Inner) the
E4
sensor does not
work.
The hob tempera-
E5
ture is higher than
280 ° C.
IGBT (Inner)
temperature is too
E6
high.
Failed communi-
cation between
Er
the hob and the
motherboard.
There is excess liq-
Et
uid on the control
panel buttons
17
WORK TIME
90 minutes
4 hours
5 hours
6 hours
SUGGESTION
Check voltage
Check voltage
Reduce power or
switch off
Reduce power or
switch off
Automatic switching
off after 1 minute
Switch off and stop
heating
Switch off and stop
heating
Clean and dry the
control