Idiomas disponibles
Idiomas disponibles
3. Instructions for use
The product is designed exclusively for mowing lawns, weeds, brush, etc. The machine must not be used for
shredding branches, trimming shrubs, roots, etc.
The operator is responsible for any damage caused by misuse.
3.1.
Description of the HT-GT-600HP
3.2.
Installation of the HT-GT-600HP device
Note: Product drawings can be found at the end of the manual in section 3.8. Drawings .
a) Install the lower steering wheel with 4 screws on the console. Then install the upper steering wheel.
The struts must be on the inside. As shown in Figure A2 .
b) Install the clutch handle and throttle as shown in Figure A3.
c)
Install the rubber cover on the plastic cover as shown in Figure A4.
d) Install the trimmer cable. Follow the procedure step 1-2-3 as shown in Figure A5.
Figure A1:
A. Mower cord
B. Mower head
C. Throttle lever
D. Mower activation lever
E. Engine
F. Wheels
G. Lawnmower protective cover
