Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATION OF YOUR HEATER
Remove the heater from all packaging and place it in desired location.
•
Ensure that there is a safe area between the heater and furniture,curtains,etc-50cm safe area form
•
top and sides and 120cm safe area in front.
Unwind the Power Cord and plug it into the Power Outlet.
•
To activate the heater ,turn the knob clock-wise to the '* 'position for cool air. Turn knob to 'I' for low
•
power, 'II' for maximum power.
AUTO SATETY SHUT OFF
The heater has a built-in safety device, which will switch the heater OFF in case of accidental
•
overheating. To reset the heater, follow the next steps:
Turn the control setting to the 'O' position.
•
Unplug the heater and wait 5-10minutes for the unit to cool down.
•
After the unit has cooled, plug it in and operate normally.
•
Turn selector switch into desired position(Fan, Low or High).
•
Turn the thermostat switch to the desired temperature position.
•
When you feel the room temperature comfortable, turn the thermostat switch anti-clockwise slowly to
•
the minimal direction until the appliance switches off.
The thermostat switch will keep the room temperature at the desired temperature automatically.
•
You can also turn the thermostat switch anti-clockwise to the minimum position or turn the
•
thermostat switch clockwise to the maximum position to make the temperature lower or higher.
Note: NEVER COVER THE HEATER
DO NOT IMMERSE IN WATER OR ANY LIQUID
Be sure to switch off the power supply and pull out the plug out the plug before cleaning.
•
Wait for the heater to cool down sufficiently.
•
Clean the body of the heater with a damp cloth. DO NOT ALLOW water into the appliance.
•
DO NOT use soap or chemicals which may damage the housing of the heater.
•
Allow sufficient drying time before operating again.
•
Clean the air inlets and outlets regularly with a vacuum cleaner(with regular use ,at least twice a
•
year)
When the unit is not in use, we recommend that the heater is re-packed in its original packaging and
•
stored in a cool, dry place.
CLEANING AND MAINTENANCE
Be sure to switch off power supply and pull out the plug before cleaning.
•
Wait for the heater to cool down sufficiently.
•
Clean the body of the heater with a damp cloth. DO NOT ALLOW water into the appliance.
•
DO NOT use soap or chemicals which may damage the housing of the heater.
•
Allow sufficient drying time before operating again.
•
Clean the air inlets and outlets regularly with a vacuum cleaner(with a regular use, at least twice a
•
year).
Pagina 3
Tabla de contenido
