Idiomas disponibles
Idiomas disponibles
! CAUTION
Read all precautions and instructions in this manual before using the equipment.
Unpack all components and check contents against parts list below. Advise supplier
immediately if any parts are missing.
Subassembly Parts List
No.
Name of parts
1
Top cap-1pc
2
Acrylic Panel-1pc
3
Metal Base-1pc
Remote Control-1pc
4
Air-Pump-1pc
5
Transformer-1pc
6
Controller-1pc
7
8
PVC Water Pipe-1pc
Blue Nozzles-3pcs
9
10
Air-Pipes-5pcs
11
Screws-3 pcs
Photos des composants
Assembly Guide
IMPORTANT: 2 people are required to assemble this unit. Please do not attempt to
assemble on your own.
Step 1
Place Metal Base on a level surface at desire location. One people hold the column
panel.If you want to install the water feature on a slope ground, you need fix the base on
the ground by the three screws first.
Step 2
Thread the transformer cable through the opening in the side of the base. Join up the
adaptor cord walking along the gap in the panel bottom into controller.
Step 3
Slide the column acrylic panel into the base properly.
OWNER'S MANUAL
Function description
Top cap is at the top of the acrylic panel.
Acrylic panel is used to hold water, display dancing illuminated
bubbles.
A base for acrylic panel.
Control the power off & on and color changing.
Produce Air & generate bubbles.
Supply Power.
Equipment designed to receive remote control order.
This part is tool for water injection in and siphon water from
Acrylic Panel.
Outlet of gas connects with Air-pipe in Air-pump.
Connect with blue nozzle and air pump
Screw is used to fix the base on the ground if requirement
6
