Idiomas disponibles
Idiomas disponibles
The whole handset surface is a touch panel. If there is no touch within 30 seconds, the screen is locked and all
keys are locked correspondingly. The screen display " LOC ".You can touch "
Up & down key
Please keep pressing UP/DOWN key to adjust desk height until you get an desire height.
Display Screen
Display the height value of the desk.
Memory key
(
/
After seting memory keys, the desk can lift automatically to memory height.
※ How to set memory mode
Click the "
" key when running to a specific point.The display screen displays "S-" and "-"flashes.
At this time,press "
/
height is successfully saved. Then press "
Set Key
(
)
Press the "
"key when memory bits and internal parameters need to set.
Initalization
1.When"RST"is on the display screen, press the"
After hearing the "deep" sound and desk frame rebounds, initialization is completed.
(P.S. The button cannot be released during this operation, otherwise the initialization will fail)
2.Forced initialization: Press the"
the button and press it again for about 5 seconds until hear the "beep" sound and desk frame
rebound, and the initialization is completed.
3.Restore the factory settings: When new controller is changed or the parameters need to be restored
to the factory settings, press the"
sound after about 5 seconds and second "beep" sound after 10 seconds. When the display screen
shows "RST",please operate refer to the No.1 item.
Safety Function
When the desktop is on the rise or down, encountered reverse resistance,the desk will rebound.
Handset shows erro code and solution
Error code
E01,E06,E07
Power fault
E02
Nsynchronous height over 1cm
E04
Handset fault
E05
Anticollisioan alert
E08
Desktop sloping
E11,E21,E40,E41
connection cable failure
E12,E22,E42,E743
Controller fault
E14～E17,E24～E27
Motor fault
E18,E28
Over loading
HOT
Overtime operation
Up&Down Key Display Screen
)
" button to store the position to the corresponding label. The memory
/
"button until the desk frame reaches its lowest point, then release
"and"
"buttons simultaneously, you will hear the first "beep"
Facut cause
Memory Key
" ,the desk moves to memory height auotomatically.
"button until the desk frame reaches its lowest point.
Change power
Implement the initialization operation 1
Unplug and replug the cable of handset
Rebound reminder,normal condition
Check the desktop
Check the connecting cable
Change the controller
Change motor
Reduce the loading
Automatic recovery after stop using for
20 minutes.
Set Key
" keys for 3 seconds to unlock.
Solution
11
