Symbols In This Manual; Installation Notes; Handling Precautions; English - Sharp MX-M654N Guía De Inicio

CAUTIONS
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be
easily accessible.
Each instruction also covers the optional units used with these products.

Symbols in this manual

To ensure safe use of the machine, this manual uses various safety
symbols. The safety symbols are classified as explained below. Be sure
you understand the meaning of the symbols when reading the manual.
WARNING
Indicates a risk of death or
serious injury.
Meaning of the symbols
CAUTION! HOT
PINCH POINT KEEP
CLEAR
PROHIBITED ACTIONS
Power notes
To ensure safe use of the machine, this manual uses various safety
symbols. The safety symbols are classified as explained below. Be sure
you understand the meaning of the symbols when reading the manual.
WARNING
Be sure to connect the power cord only to a power outlet
that meets the specified voltage and current requirements.
Also make certain the outlet is properly grounded. Do not
use an extension cord or adapter to connect other devices
to the power outlet used by the machine.
Using an improper power supply may cause fire or
electrical shock.
* For the power supply requirements, see the name plate on
the left side of the machine.
Do not damage or modify the power cord.
Placing heavy objects on the power cord, pulling it, or forcibly
bending it will damage the cord, resulting in fire or electrical shock.
Do not insert or remove the power plug with wet hands.
This may cause electrical shock.
CAUTION
When removing the power plug from the outlet, do not
pull on the cord.
Pulling on the cord may cause damage such as wire exposure
and breakage, and may result in fire or electrical shock.
If you will not use the machine for a long time, be sure to
remove the power plug from the outlet for safety.
When moving the machine, switch off the main power and
remove the power plug from the outlet before moving.
The cord may be damaged, creating a risk of fire or electrical
shock.

Installation notes

CAUTION
Do not install the machine on an unstable or slanted
surface. Install the machine on a surface that can
withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.
If peripheral devices are to be installed, do not install on an
uneven floor, slanted surface, or otherwise unstable surface.
Danger of slippage, falling, and toppling. Install the product on a
flat, stable surface that can withstand the weight of the product.
CAUTION
Indicates a risk of human injury or
property damage.
DO NOT DISASSEMBLE
MANDATORY ACTIONS
Do not install in a location with moisture or dust.
Risk of fire and electrical shock.
If dust enters the machine, dirty output and machine failure
may result.
Locations that are excessively hot, cold, humid, or dry
(near heaters, humidifiers, air conditioners, etc.)
The paper will become damp and condensation may form
inside the machine, causing misfeeds and dirty output.
If the location has an ultrasonic humidifier, use pure water for
humidifiers in the humidifier. If tap water is used, minerals and
other impurities will be emitted, causing impurities to collect on
the inside of the machine and create dirty output.
When the machine is installed, the adjusters must be
lowered to the floor to secure the machine (prevent it
from moving).
Rotate the adjusters in the locking direction until they are in
firm contact with the floor.
If you find it necessary to reposition the machine due to
rearrangement of your office layout or other reason,
retract the adjusters from the floor, turn off the power,
and then move the machine.
(After moving the machine, lower the adjusters again to
secure the machine.)
Locations exposed to direct sunlight
Plastic parts may become deformed and dirty output may result.
Locations with ammonia gas
Installing the machine next to a diazo copy machine may
cause dirty output.
Do not install the machine in a location with poor air
circulation.
A small amount of ozone is created inside the machine during
printing. The amount of ozone created is not sufficient to be
harmful; however, an unpleasant odor may be noticed during
large copy runs, and thus the machine should be installed in a
room with a ventilation fan or windows that provide sufficient air
circulation. (The odor may occasionally cause headaches.)
* Install the machine so that people are not directly exposed to
exhaust from the machine. If installed near a window, ensure
that the machine is not exposed to direct sunlight.
Near a wall
Be sure to allow the required
space around the machine for
servicing and proper ventilation.
(The machine should be no
closer than the distances
indicated below from walls.)
Locations subject to vibration.
Vibration may cause failure.
CAUTION
The machine includes a built-in hard drive. Do not subject the
machine to shock or vibration. In particular, never move the
machine while the power is on.
• The machine should be installed near an accessible power
outlet for easy connection.
• Connect the machine to a power outlet which is not used for
other electric appliances. If a lighting fixture is connected to
the same outlet, the light may flicker.
About consumables
CAUTION
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
Store a toner cartridge out of the reach of children.

Handling precautions

WARNING
Do not place a container of water or other liquid, or a
metal object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine, fire or
electrical shock may result.
3

English

30 cm
Machine
30 cm 45 cm