Emos SELECT ESW9010 Guia Del Usuario página 18

FIRMWARE UPDATE
The console supports OTA firmware update capability. Its firmware may be updated over
the air anytime (whenever necessary) through any web-browser on a PC / Mac with WI-FI
connectivity. Update function, however, is not available through mobile/smart devices.
Current firmware
version
FIRMWARE UPDATE STEP
1. Download the latest version firmware to your PC / Mac.
2. Set the Console into AP (access point) mode then connect the PC / Mac to the console (ref
to "SETUP WI-FI CONNECTION" section in previous page).
3. Click the
Browse
download in step 1. To update the WI-FI firmware, click the
section.
4. Click the corresponding
5. In the meantime, the console will execute the update
automatically and will show the update progress on display (i.e.
100 is completion).
The update time is around 5 ~ 8 minutes
6. The console will restart once the update is completed.
7. The console will stay in AP mode for you to check the firmware version and all the current
setting.
IMPORTANT NOTE:
- Please keep connecting the power during the firmware update process.
- Please make sure your PC / Mac's WI-FI connection is stable.
- When the update process start, do not operate the PC / Mac and console until the update
finished.
- During firmware update the console will stop upload data to the cloud server. It will reconnect
to your WI-FI router and upload the data again once the firmware update succeed. If the
console cannot connect to your router, please enter the SETUP page to setup again.
- After the firmware update, If the setup informations are missing, please input the setup
information again.
- Firmware update process have potectial risk, which cannot guarantee 100% success. If the
update fail, please redo the above step to update again.
OTHER SETTING & FUNCTIONS OF THE CONSOLE
MANUAL CLOCK SETTING
This console is designed to obtain the UTC time by synchronize with the assigned internet time
server. If you want to use it offline, you can set the time and date manually. During the first time
startup, press and hold the [ SENSOR / WI-FI ] key for 6 seconds and let the console back to
normal mode.
1. In normal mode, press and hold [ CLOCK SET ] key for 2 seconds to enter setting.
2. The setting sequence: DST AUTO/OFF
format Year
Language.
3. Press [ ] or [
4. Press [ CLOCK SET ] key to save and exit the setting mode, or the unit will automatically
exit the setting mode 60 seconds later without pressing any key.
Firmware version: 1.00
Bottom of web interface ADVANCED page
in firmware update section and browse the location of the file you
to start transfer the firmware file to console.
Upload
Month Day M-D/D-M format
] key to change the value. Press and hold the key for quick-adjust.
Browse
Upload
Hour
Minute
second
Time sync ON/OFF
18
Please to select the firmware file for
update
Press to start upload the firmware
to console
in WI-FI firmware
Browse
12/24 hour
weekday