External Power Supply; Assembly With Strap - COOLIFE H881 Guia Del Usuario

Preparing the Camera

3.4.External power supply

Optionally, you can connect an external
6V DC power source with at least 1.5 A
to the 'DC In' jack at the bottom of the
camera. The power
connector is a 3.5x1.35 mm coaxial DC
power plug with positive 'tip'
(inside pin) polarity. Leave internal batteries in the camera during use.
Note:
■ Rechargeable batteries cannot be recharged in the camera using an
external power supply.
■ It is not recommended to use a universal external power adapter, if
the voltage is adjusted to inaccurate, you risk to burn the camera.
■ When using an external power source, please leave four or eight new
batteries( Avoid External Power Suspension).

3.5.Assembly with strap

Use the securing strap supplied to attach the Wildlife Camera to a tree
or another object. The illustrations below demonstrate how to fasten
the securing strap.
18