Idiomas disponibles
Idiomas disponibles
Cleaning
EN
Wood is a living material that is very aesthetic, warm and e cient but it requires maintenance. it is recommended to
maintain your wooden garden furniture twice a year. A first time in spring and then at the end of the summer. The cleaning is
done with a brush and warm soapy water. But not with just any soap. The use of black soap or Marseille soap is preferred. Rinse
thoroughly with lukewarm water. In any case, do not use a high pressure cleaner. If you want the wood to keep its original colour wood
and protects its natural appearance for a long time. Apply the saturator twice a year on over time, use a "colourless saturator" that nourishes the wood
that has been cleaned beforehand with a dry cloth and apply it in the direction of the wood fibres. If after cleaning, stains remain, you can then sand the
surface with fine grain sandpaper. This is the advantage of solid wood. If you have neglected the maintenance of your wooden furniture until now, it is not
too late to make up for the damage. Whatever your case, test your solution on an inconspicuous area to make sure the result is what you want.
You can clean your aluminium furniture with a non-abrasive sponge. Use clear water with a little soap. In order to avoid the appearance of traces during
the drying, we advise you to proceed to the drying with a terry towel, right after the cleaning.
Wintering
In case of prolonged non-use or bad weather, it is recommended to store your product in a dry place or to use a suitable cover to protect your it.
The cushions and fabric parts of NATERIAL products should be removed when not in use for long periods of time. Brush the cushions regularly to remove
dust. Be sure to store them in a dry, ventilated area to prevent the development of mould or odours.
5. FASTENINGS
For better stability and for your safety, tighten the screws once again around two weeks after setup. Tighten the screws also at least
once a year for a long-lasting maintenance.
6. REPAIR
Let's not throw away! Let's repair! Repairing a product is a quick and easy way to significantly increase its lifespan and avoid throwing it away. At Naterial,
we actively work to facilitate the repair of our products and o'er the right spare parts for each product we sell. The service department at your point
of sale has a list of spare parts available for that product. In case of a defective or broken part, we invite you to contact the after-sales service
7 .
In order to protect the environment, cardboard packaging and products at the end of their life cycle must be dropped o' at a waste collection organization
for sorting, processing and a new life.
