Idiomas disponibles
Idiomas disponibles
Plug the charger connector into the socket
on the back of the appliance.
While the battery is charging, the pilot light
will turn on to indicate that the charger is
charging the battery.
Remove the battery from the charger after
the specified amount of time.
Once charging is complete, unplug the
charger from the wall outlet.
Note: Do not use the appliance while it is
plugged in.
Note: For a long useful battery life, it is
recommended that you only charge the
battery once it is fully depleted.
Use indicator
The use indicator indicates the battery
status:
Flashing red - the battery needs to be
charged.
Steady red - the battery is low.
Steady green - charge complete.
Assembling the multi-surface motorized
cleaner head and accessories (Fig. 3)
Fit the wand, multi-surface motorized
cleaner head or the accessories into the
wand/accessory connection or into the end
of the wand.
WARNING
Press and hold the accessory release
button while fitting or removing the tube
or accessories. Do not force any of the
components, as this could damage the
appliance.
OPERATION
Use/battery indicator
The use indicator indicates the battery
status:
Flashing red - the battery needs to be
charged.
Steady red - the battery is low.
Steady green - charge complete.
Before first use
Before using the product for the first time,
it is important to let the battery charge
completely.
Prepare the appliance according to the
desired vacuum function.
Use
Press the ON/OFF button to start the
appliance (the use/battery indicator will
light up) and vacuum at moderate strength.
Press the button again to vacuum at
maximum strength.
Pressing the button again will turn off the
appliance.
After use
To remove the wand and the accessories
from the vacuum cleaner, press the
accessory release button and pull.
Remove the battery from the appliance if it
will not be used for a long period of time.
Clean the appliance.
English
21
