MD SPORTS 18402 Instrucciones De Armado página 12

FIG.8 CONNECTING WIRE ASSEMBLY
SCORER
HOME(Short Sensor Wire)
VISITOR(Long Sensor Wire)
24. Attach the "U" Bracket (#18) to the playfield support using two Screws (#17).
25. Slide the Socket into the Bracket(#18), insert the plug(square head) of the Adapter (#19) and the plug of the Blower
into the Socket. See FIG.8A
26. Connect the Scorer Wire to the Control Box (#22).See FIG.8B
27. Plug the Adapter wire (#19) to the Control Box (#22), and then Connect the Home & Visitor Sensor Wire (pre-installed
with the puck catcher) to the Control Box (#22). See FIG.8B
FIG.8B
Adapter
Home (Short
Sensor Wire)
Short Sensor Wire
Note: Make Sure the Short Sensor Wire
and Control Box on the same side.
ADAPTER
FIG.8
Scorer Wire
Visitor (Long
Sensor Wire)
SOCKET
Underside the table
FIG.8A
17
Adapter
Long Sensor Wire
Scorer Wire
11
BLOWER
18
Socket