Adler europe AD 2941 Manual De Uso página 5

creams. If you want to use creams or body lotion, apply them after you have used the appliance.
1. Place head with shaving foil on your skin (1). Be sure that head with shaving foil (1) touches
skin evenly.
2. Turn on the shaver by moving the on/off switch up (6).
3. Move the appliance slowly against the direction of hair growth.
4. When you use the appliance on sensitive areas, stretch the skin with your free hand. When
you use the appliance on your underarms, raise your arm and put your hand on the back of your
head to stretch the skin.
Note: When you use the appliance to trim hair, use it dry for the best result.
PROTECTIVE FOIL PLACEMENT/REMOVAL
1. Make sure the device is turned off. Turn off the shaver by moving the on/off switch down (6).
2. In order to remove the protective foil slide the release switch (4) to the right.
3. Hold the switch and take off the head with shaving foil (1).
4. Release the switch.
5. In order to place the protective foil back. Slide the release switch to the right. Hold the switch
and put the shaving foil on the blades. Press carefully to hear the click sound. Release the switch
to block the head.
CLEANING AND STORAGE
1. Make sure the device is turned off. Turn off the shaver by moving the on/off switch down (6).
2. Use the cleaning brush to brush away any hair that have collected under the trimmer (2) of the
shaving head (6).
3. Remove the shaving foil (1) (read point PROTECTIVE FOIL PLACEMENT/REMOVAL) to clean
around the blades.
4. Twist off the shaving head (5) to clean underneath.
5. Clean all parts of the shaving head with the cleaning brush, except the shaving foil.
6. Rinse the head with shaving foil. Then shake firmly to remove water drops.
7. Let all parts dry completely.
8. Place the head with shaving foil back (1) onto the shaving head (5).
USING THE BIKINI COMB
Put the bikini comb (8) onto the shaving head (5). Press gently to hear the click sound. Turn on
the shaver by moving the on/off switch up (6).
TECHNICAL DATA:
Battery: 2xAAA (1.5V)
Please transfer cardboard packaging to waste paper. Pour the polyethylene bags
(PE) into the plastic container
Worn device should be returned to the appropriate point storage because it is
dangerous in the device
ingredients may pose a threat to the environment. The electrical device should be
handed over to limit
its reuse and use. If in the device there are batteries you have to take out and give to
the point stored separately.
5